Product Description
Product Description
Feature:
1. Leading power-cut braking technology. Motor is isolated from controller’s HV output circuit. Contact point is disconnected after stopping. No charged door body spontaneous combustion, fire and electric leakage hazards! Quiet, soft braking, more stable operation and safer braking;
2. There are only 2 connecting cables between motor reducer and electric box. Simple installation and wiring on site;
3. Absolute value encoder or mechanical limit switch can be selected
4. Controller adopts IPM intelligent module with compact structure and has stronger functionalities.
5. It has inching/manual/automatic, fully open/partially open, single button, adjustable light ineffective position, interlocking, double-door interlocking automatic door opening, air curtain machine control, door opening in place, door closing in place, fault output, RS485 Internet of Things remote control functionalities;
6. Unified installation dimensions 220V/0.75KW, 1.5KW and 2.2KW
7. Simple and friendly operation interface, convenient debugging and maintenance;
8. Real-time monitoring on signal and alarm, and one-key to restore factory preset value.
The DM400 series products include a set of servo control boxes, servo motors, and absolute encoders, which are used to support the control of PVC fast rolling shutter doors, stacking doors, hard fast rolling doors, sliding doors and other industrial categories.Plug and play, stable performance, friendly interface for control parameters, powerful functions, easy to debug and maintain.
IPM intelligent power module design
The control box adopts the leading IPM intelligent power module design, the structure is clean and compact, and only 2 cables are connected between the control box and the motor, plug and play.
Servo control box panel
Control Box Specfication
|
Model |
DM400 |
DM401 |
DM402 |
|
Rated power |
0.75kw |
1.5kw |
2.2kw |
|
Shell size (Length x Heightx Depth) |
250 x 400 x 130 mm |
||
|
Power supply voltage |
Single-phase AC220V~240V 50~60Hz |
||
|
Control voltage |
DC24V, Max. current 400 mA |
||
|
Position control |
Absolute value encoder or mechanical limit switch |
||
|
Overload capacity |
150% rated current for 1 minute |
||
|
Operating ambient temperature |
-10~50ºC |
||
|
Place of use |
Free from oil mist, dust, corrosive or flammable gas,etc. |
||
|
Weight |
6Kg |
||
Motor specification
|
Motor model |
DM-2430 |
DM-4030 |
DM-6030 |
|
Rated power |
0.75KW |
1.5KW |
2.2KW |
|
Rated current |
3A |
5A |
6A |
|
Lifting weight |
50KG |
100KG |
150KG |
|
Applicable door size |
10M² |
30M² |
50M² |
|
Rated voltage |
AC220V |
||
|
Insulation grade |
F |
||
|
Operating ambient temperature |
-40~+50ºC |
||
|
Protection grade |
IP54 |
||
0.75KW Servo Motor Size Drawing
1.5KW Servo Motor Size Drawing
Absolute value encoder
For More Details Of Product Specifications,
Please Click here contact us for updated size drawing if you have other different parameter needed. Thanks
Company Profile
DMKE motor was founded in China, HangZhou city,Xihu (West Lake) Dis. district, in 2009. After 12 years’ creativity and development, we became 1 of the leading high-tech companies in China in dc motor industry.
We specialize in high precision micro dc gear motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers etc. And we produce brushless dc motor and controller with wide power range from 5 watt to 20 kilowatt; also dc servo motor power range from 50 watt to 10 kilowatt. They are widely used in automatic guided vehicle , robots, lifting equipment,cleaning machine, medical equipment, packing machinery, and many other industrial automatic equipments.
With a plant area of 4000 square meters, we have built our own supply chain with high quality control standard and passed ISO9001 certificate of quality system.
With more than 10 engineers for brushless dc motor and controllers’ research and development, we own strong independent design and development capability. Custom-made motors and controllers are widely accepted by us. At the same time, we have engineers who can speak fluent English. That makes we can supply intime after-sales support and guidance smoothly for our customers.
Our motors are exported worldwide, and over 80% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea etc. We are looking CHINAMFG to establishing long-term business relationship together with you for mutual business success.
FAQ
Q1: What kind motors you can provide?
A1: For now, we mainly provide permanent magnet brushless dc motor, dc gear motor, micro dc motor, planetary gear motor, dc servo motor, brush dc motors, with diameter range from 16 to 220mm,and power range from 5W to 20KW.
Q2: Is there a MOQ for your motors?
A2: No. we can accept 1 pcs for sample making for your testing,and the price for sample making will have 10% to 30% difference than bulk price based on different style.
Q3: Could you send me a price list?
A3: For all of our motors, they are customized based on different requirements like power, voltage, gear ratio, rated torque and shaft diameter etc. The price also varies according to different order qty. So it’s difficult for us to provide a price list.
If you can share your detailed specification and order qty, we’ll see what offer we can provide.
Q4: Are you motors reversible?
A4: Yes, nearly all dc and ac motor are reversible. We have technical people who can teach how to get the function by different wire connection.
Q5: Is it possible for you to develop new motors if we provide the tooling cost?
A5: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we’ll make our evaluation to see if we can arrange or not.
Q6:How about your delivery time?
A6: For micro brush dc gear motor, the sample delivery time is 2-5 days, bulk delivery time is about 15-20 days, depends on the order qty.
For brushless dc motor, the sample deliver time is about 10-15 days; bulk time is 15-20 days.
Pleasecontact us for final reference.
Q7:What’s your warranty terms?
A6: One year
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Warranty: | 13 Months |
|---|---|
| Electric Current Type: | AC |
| Brand: | Dmke |
| Motor Type: | Worm Gear Servo Motor |
| Rated Power: | 0.75kw |
| Rated Voltage: | DC48V |
| Samples: |
US$ 547.2/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What maintenance practices are recommended for ensuring the longevity of servo motors?
Maintaining servo motors properly is crucial to ensure their longevity and reliable performance. Here are some recommended maintenance practices:
1. Regular Cleaning:
Regularly clean the servo motor to remove dust, debris, and other contaminants that can affect its performance. Use a soft brush or compressed air to clean the motor’s exterior and ventilation ports. Avoid using excessive force or liquid cleaners that could damage the motor.
2. Lubrication:
Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant for the motor. Lubricate the motor’s bearings, gears, and other moving parts as per the specified schedule. Proper lubrication reduces friction, minimizes wear, and helps maintain optimal performance.
3. Inspections:
Regularly inspect the servo motor for signs of wear, damage, or loose connections. Check for any unusual noises, vibrations, or overheating during operation, as these can indicate potential issues. If any abnormalities are detected, consult the manufacturer’s documentation or seek professional assistance for further evaluation and repair.
4. Electrical Connections:
Ensure that all electrical connections to the servo motor, such as power cables and signal wires, are secure and properly insulated. Loose or damaged connections can lead to electrical problems, voltage fluctuations, or signal interference, which can affect the motor’s performance and longevity.
5. Environmental Considerations:
Take into account the operating environment of the servo motor. Ensure that the motor is protected from excessive moisture, dust, extreme temperatures, and corrosive substances. If necessary, use appropriate enclosures or protective measures to safeguard the motor from adverse environmental conditions.
6. Software and Firmware Updates:
Stay updated with the latest software and firmware releases provided by the servo motor manufacturer. These updates often include bug fixes, performance enhancements, and new features that can improve the motor’s functionality and reliability. Follow the manufacturer’s instructions for safely updating the motor’s software or firmware.
7. Training and Documentation:
Ensure that personnel responsible for the maintenance of servo motors are properly trained and familiar with the manufacturer’s guidelines and documentation. This includes understanding recommended maintenance procedures, safety precautions, and troubleshooting techniques. Regular training and access to up-to-date documentation are essential for effective servo motor maintenance.
8. Professional Servicing:
If a servo motor requires complex repairs or servicing beyond regular maintenance, it is advisable to consult a qualified technician or contact the manufacturer’s service center. Attempting to repair or modify the motor without proper expertise can lead to further damage or safety hazards.
By following these maintenance practices, servo motors can operate optimally and have an extended lifespan. Regular cleaning, lubrication, inspections, secure electrical connections, environmental considerations, software updates, training, and professional servicing all contribute to ensuring the longevity and reliable performance of servo motors.
What factors should be considered when selecting a servo motor for a specific application?
When selecting a servo motor for a specific application, several factors need to be considered. These factors help ensure that the chosen servo motor meets the requirements and performs optimally in the intended application. Here are some key factors to consider:
1. Torque and Power Requirements:
One of the primary considerations is the torque and power requirements of the application. The servo motor should be able to generate sufficient torque to handle the load and overcome any resistance or friction in the system. Additionally, the power rating of the motor should match the power supply available in the application. It is essential to evaluate the torque-speed characteristics of the servo motor to ensure it can deliver the required performance.
2. Speed and Acceleration:
The required speed and acceleration capabilities of the servo motor should align with the application’s needs. Different applications have varying speed and acceleration requirements, and the servo motor should be able to meet these demands. It is crucial to consider both the maximum speed that the motor can achieve and the time it takes to accelerate or decelerate to specific speeds. Evaluating the servo motor’s speed-torque characteristics and acceleration capabilities is necessary for selecting the right motor.
3. Positioning Accuracy and Repeatability:
The desired positioning accuracy and repeatability of the application play a significant role in servo motor selection. If precise positioning is crucial, a servo motor with high accuracy and low positioning errors should be chosen. The feedback mechanism, such as encoders or resolvers, should provide the required resolution to achieve the desired accuracy. Repeatability, the ability to consistently reach the same position, should also be considered, especially in applications where repetitive movements are necessary.
4. Environmental Conditions:
The environmental conditions in which the servo motor will operate should be taken into account. Factors such as temperature extremes, humidity, dust, and vibration can affect the motor’s performance and lifespan. In harsh environments, it may be necessary to choose a servo motor with appropriate protection ratings, such as IP (Ingress Protection) ratings, to ensure reliable operation and longevity.
5. Control System Compatibility:
The compatibility of the servo motor with the control system used in the application is crucial. The motor should be compatible with the control signals and communication protocols employed in the system. This includes considerations such as voltage compatibility, control signal types (analog, digital, pulse), and communication interfaces (such as Ethernet, CAN, or Modbus). Ensuring compatibility will facilitate seamless integration and efficient control of the servo motor within the application.
6. Size and Weight Constraints:
The physical size and weight limitations of the application should be considered when selecting a servo motor. The motor’s dimensions should fit within the available space, and its weight should not exceed the application’s weight capacity. Compact and lightweight servo motors may be preferred in applications where space is limited or weight is a critical factor.
7. Cost Considerations:
The cost of the servo motor and its overall value for the application should be evaluated. It is essential to consider the initial purchase cost as well as the long-term maintenance and operational costs. While cost is a factor, it should not be the sole determining factor, as compromising on quality or performance may lead to suboptimal results.
By considering these factors, one can make an informed decision when selecting a servo motor for a specific application. It is recommended to consult with manufacturers or experts in the field to ensure the chosen servo motor meets the application’s requirements and provides reliable and efficient performance.
What is a servo motor, and how does it function in automation systems?
A servo motor is a type of motor specifically designed for precise control of angular or linear position, velocity, and acceleration. It is widely used in various automation systems where accurate motion control is required. Let’s explore the concept of servo motors and how they function in automation systems:
A servo motor consists of a motor, a position feedback device (such as an encoder or resolver), and a control system. The control system receives input signals, typically in the form of electrical pulses or analog signals, indicating the desired position or speed. Based on these signals and the feedback from the position sensor, the control system adjusts the motor’s operation to achieve the desired motion.
The functioning of a servo motor in an automation system involves the following steps:
- Signal Input: The automation system provides a control signal to the servo motor, indicating the desired position, speed, or other motion parameters. This signal can be generated by a human operator, a computer, a programmable logic controller (PLC), or other control devices.
- Feedback System: The servo motor incorporates a position feedback device, such as an encoder or resolver, which continuously monitors the motor’s actual position. This feedback information is sent back to the control system, allowing it to compare the actual position with the desired position specified by the input signal.
- Control System: The control system, typically housed within the servo motor or an external servo drive, receives the input signal and the feedback from the position sensor. It processes this information and generates the appropriate control signals to the motor.
- Motor Operation: Based on the control signals received from the control system, the servo motor adjusts its operation to achieve the desired motion. The control system varies the motor’s voltage, current, or frequency to control the motor’s speed, torque, or position accurately.
- Closed-Loop Control: Servo motors operate in a closed-loop control system. The feedback information from the position sensor allows the control system to continuously monitor and adjust the motor’s operation to minimize any deviation between the desired position and the actual position. This closed-loop control mechanism provides high accuracy, repeatability, and responsiveness in motion control applications.
One of the key advantages of servo motors in automation systems is their ability to provide precise and dynamic motion control. They can rapidly accelerate, decelerate, and change direction with high accuracy, allowing for intricate and complex movements. Servo motors are widely used in applications such as robotics, CNC machines, printing presses, packaging equipment, and automated manufacturing systems.
In summary, a servo motor is a specialized motor that enables accurate control of position, velocity, and acceleration in automation systems. Through the combination of a control system and a position feedback device, servo motors can precisely adjust their operation to achieve the desired motion. Their closed-loop control mechanism and high responsiveness make them an essential component in various applications requiring precise and dynamic motion control.
editor by CX 2024-04-26
China high quality Original Used G2.144.1171 Servo-Drive Automatic Cleaning Motor Servo Motor for Heidelberg Sm52 Pm52 Sx52 Offset Printing Parts vacuum pump oil near me
Product Description
Original Used G2.144.1171 Servo-Drive Automatic Cleaning Motor Servo Motor For Heidelberg SM52 PM52 SX52 Offset Printing Parts
HangZhou XiangChen Printing Equipment Co., Ltd is a professional printing machinery spare parts supplier, established in 2015, with 3 branch companies now.
We specialize in Heidelberg, Man Roland and Komori Printing Machine Spare Parts including original circuit boards, computer boards, PC boards, pneumatic cylinders, motors, sensors, valves, cam followers, bearings, gripper fingers, rollers, gripper bars, bellows and so on. Most replacement spare parts are available as well.
As the experience began to accumulate in the printing industry, we could provide you good-quality products, competitive price and considerate customer services. We have made long-term business relationships with many oversea customers due to our good supply ability and good reputation in the international market.
We hold the business philosophy of ” Service-oriented, CHINAMFG cooperation” And the ” Customers first” principle to provide you with sophisticated products and considerate services.
Q1: What is your scope of business?
A: We specialize in the export of offset printing machinery spare parts for Heidelberg, Man Roland and Komori. The main products include circuit board, pneumatic cylinder, bearing, sensor, gear, valve, motor, belt, gripper, gripper bar, cam follower and so on.
Q2: What is your means of packing?
A: Generally, we pack the goods in carton or wooden case and use bubble pad to protect it. Also, we can pack the goods as your specific request. The detailed package pictures and videos will be sent to you before shipping.
Q3. What type of payment do you accept?
A: L/C, T/T, Western Union, Paypal, MoneyGram.
Q4: How about the delivery time?
A: Most spare parts are in stock. Generally, we will arrange shipment within 3 days after your payment. The specific delivery time depends on your order and your location mostly. Please rest assured that shipment will be arranged immediately on receipt of your payment.
Q5. Will you test the product before delivery?
A: We promise that all of the products are in good condition through the strict quality control and they will be tested repeatedly and checked carefully before delivery.
Q6: How many years have you engaged in printing industry?
A: HangZhou CHINAMFG Chen Printing Equipment Co, Ltd is founded by CHINAMFG who has devoted himself to printing industry for more than 15 years. As the professional experience began to accumulate in this field, he established the company in 2015 to deal in offset printing machine spare parts.
Q7: Why choose us?
1.You will benefit a lot from our high-quality products, competitive price and considerate customer services. We have made long-term cooperation with many oversea customers.
2. Due to our steady and sincere way of conducting business, our company enjoys good reputation among the local wholesalers in domestic market.
3. There is a professional engineer team in our company who served in the leading domestic printing industry for many years. They will offer you the best spare parts replacement solution and repair services according to your specific demands.
4. We are willing to enter into business relations with you on the basis of equality, mutual benefit and exchanging what 1 has for what we need.
Q8. How can I visit your company?
A: Our company is located in Classic Print Mechanical Market, HangZhou, China. It is half an hour away from HangZhou Xihu (West Lake) Dis. International Airport. Welcome to your Visit.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | Motor |
|---|---|
| Usage: | For Heidelberg Printer |
| Category: | Motor |
| Name: | Circuit Board |
| Feature: | Original Used in Germany |
| Shipping Method: | DHL FedEx UPS EMS TNT/China Post |
| Customization: |
Available
|
|
|---|
What maintenance practices are recommended for ensuring the longevity of servo motors?
Maintaining servo motors properly is crucial to ensure their longevity and reliable performance. Here are some recommended maintenance practices:
1. Regular Cleaning:
Regularly clean the servo motor to remove dust, debris, and other contaminants that can affect its performance. Use a soft brush or compressed air to clean the motor’s exterior and ventilation ports. Avoid using excessive force or liquid cleaners that could damage the motor.
2. Lubrication:
Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant for the motor. Lubricate the motor’s bearings, gears, and other moving parts as per the specified schedule. Proper lubrication reduces friction, minimizes wear, and helps maintain optimal performance.
3. Inspections:
Regularly inspect the servo motor for signs of wear, damage, or loose connections. Check for any unusual noises, vibrations, or overheating during operation, as these can indicate potential issues. If any abnormalities are detected, consult the manufacturer’s documentation or seek professional assistance for further evaluation and repair.
4. Electrical Connections:
Ensure that all electrical connections to the servo motor, such as power cables and signal wires, are secure and properly insulated. Loose or damaged connections can lead to electrical problems, voltage fluctuations, or signal interference, which can affect the motor’s performance and longevity.
5. Environmental Considerations:
Take into account the operating environment of the servo motor. Ensure that the motor is protected from excessive moisture, dust, extreme temperatures, and corrosive substances. If necessary, use appropriate enclosures or protective measures to safeguard the motor from adverse environmental conditions.
6. Software and Firmware Updates:
Stay updated with the latest software and firmware releases provided by the servo motor manufacturer. These updates often include bug fixes, performance enhancements, and new features that can improve the motor’s functionality and reliability. Follow the manufacturer’s instructions for safely updating the motor’s software or firmware.
7. Training and Documentation:
Ensure that personnel responsible for the maintenance of servo motors are properly trained and familiar with the manufacturer’s guidelines and documentation. This includes understanding recommended maintenance procedures, safety precautions, and troubleshooting techniques. Regular training and access to up-to-date documentation are essential for effective servo motor maintenance.
8. Professional Servicing:
If a servo motor requires complex repairs or servicing beyond regular maintenance, it is advisable to consult a qualified technician or contact the manufacturer’s service center. Attempting to repair or modify the motor without proper expertise can lead to further damage or safety hazards.
By following these maintenance practices, servo motors can operate optimally and have an extended lifespan. Regular cleaning, lubrication, inspections, secure electrical connections, environmental considerations, software updates, training, and professional servicing all contribute to ensuring the longevity and reliable performance of servo motors.
What factors should be considered when selecting a servo motor for a specific application?
When selecting a servo motor for a specific application, several factors need to be considered. These factors help ensure that the chosen servo motor meets the requirements and performs optimally in the intended application. Here are some key factors to consider:
1. Torque and Power Requirements:
One of the primary considerations is the torque and power requirements of the application. The servo motor should be able to generate sufficient torque to handle the load and overcome any resistance or friction in the system. Additionally, the power rating of the motor should match the power supply available in the application. It is essential to evaluate the torque-speed characteristics of the servo motor to ensure it can deliver the required performance.
2. Speed and Acceleration:
The required speed and acceleration capabilities of the servo motor should align with the application’s needs. Different applications have varying speed and acceleration requirements, and the servo motor should be able to meet these demands. It is crucial to consider both the maximum speed that the motor can achieve and the time it takes to accelerate or decelerate to specific speeds. Evaluating the servo motor’s speed-torque characteristics and acceleration capabilities is necessary for selecting the right motor.
3. Positioning Accuracy and Repeatability:
The desired positioning accuracy and repeatability of the application play a significant role in servo motor selection. If precise positioning is crucial, a servo motor with high accuracy and low positioning errors should be chosen. The feedback mechanism, such as encoders or resolvers, should provide the required resolution to achieve the desired accuracy. Repeatability, the ability to consistently reach the same position, should also be considered, especially in applications where repetitive movements are necessary.
4. Environmental Conditions:
The environmental conditions in which the servo motor will operate should be taken into account. Factors such as temperature extremes, humidity, dust, and vibration can affect the motor’s performance and lifespan. In harsh environments, it may be necessary to choose a servo motor with appropriate protection ratings, such as IP (Ingress Protection) ratings, to ensure reliable operation and longevity.
5. Control System Compatibility:
The compatibility of the servo motor with the control system used in the application is crucial. The motor should be compatible with the control signals and communication protocols employed in the system. This includes considerations such as voltage compatibility, control signal types (analog, digital, pulse), and communication interfaces (such as Ethernet, CAN, or Modbus). Ensuring compatibility will facilitate seamless integration and efficient control of the servo motor within the application.
6. Size and Weight Constraints:
The physical size and weight limitations of the application should be considered when selecting a servo motor. The motor’s dimensions should fit within the available space, and its weight should not exceed the application’s weight capacity. Compact and lightweight servo motors may be preferred in applications where space is limited or weight is a critical factor.
7. Cost Considerations:
The cost of the servo motor and its overall value for the application should be evaluated. It is essential to consider the initial purchase cost as well as the long-term maintenance and operational costs. While cost is a factor, it should not be the sole determining factor, as compromising on quality or performance may lead to suboptimal results.
By considering these factors, one can make an informed decision when selecting a servo motor for a specific application. It is recommended to consult with manufacturers or experts in the field to ensure the chosen servo motor meets the application’s requirements and provides reliable and efficient performance.
What is a servo motor, and how does it function in automation systems?
A servo motor is a type of motor specifically designed for precise control of angular or linear position, velocity, and acceleration. It is widely used in various automation systems where accurate motion control is required. Let’s explore the concept of servo motors and how they function in automation systems:
A servo motor consists of a motor, a position feedback device (such as an encoder or resolver), and a control system. The control system receives input signals, typically in the form of electrical pulses or analog signals, indicating the desired position or speed. Based on these signals and the feedback from the position sensor, the control system adjusts the motor’s operation to achieve the desired motion.
The functioning of a servo motor in an automation system involves the following steps:
- Signal Input: The automation system provides a control signal to the servo motor, indicating the desired position, speed, or other motion parameters. This signal can be generated by a human operator, a computer, a programmable logic controller (PLC), or other control devices.
- Feedback System: The servo motor incorporates a position feedback device, such as an encoder or resolver, which continuously monitors the motor’s actual position. This feedback information is sent back to the control system, allowing it to compare the actual position with the desired position specified by the input signal.
- Control System: The control system, typically housed within the servo motor or an external servo drive, receives the input signal and the feedback from the position sensor. It processes this information and generates the appropriate control signals to the motor.
- Motor Operation: Based on the control signals received from the control system, the servo motor adjusts its operation to achieve the desired motion. The control system varies the motor’s voltage, current, or frequency to control the motor’s speed, torque, or position accurately.
- Closed-Loop Control: Servo motors operate in a closed-loop control system. The feedback information from the position sensor allows the control system to continuously monitor and adjust the motor’s operation to minimize any deviation between the desired position and the actual position. This closed-loop control mechanism provides high accuracy, repeatability, and responsiveness in motion control applications.
One of the key advantages of servo motors in automation systems is their ability to provide precise and dynamic motion control. They can rapidly accelerate, decelerate, and change direction with high accuracy, allowing for intricate and complex movements. Servo motors are widely used in applications such as robotics, CNC machines, printing presses, packaging equipment, and automated manufacturing systems.
In summary, a servo motor is a specialized motor that enables accurate control of position, velocity, and acceleration in automation systems. Through the combination of a control system and a position feedback device, servo motors can precisely adjust their operation to achieve the desired motion. Their closed-loop control mechanism and high responsiveness make them an essential component in various applications requiring precise and dynamic motion control.
editor by CX 2024-02-28
China wholesaler New Products Micro DC Servo Motor for Automatic Control System vacuum pump brakes
Product Description
New products Micro DC servo motor for automatic control system
Product description
1.The micro DC servo motors are widely used in automatic control system as an executive component, and also can be used as a driving component.
2.This series of motors is a new series of products designed by our country, with small volume, light weight, high force index, and a high degree of product serialization, and strong generalization of parts.
Technical data
| Model | Torque N.m |
Speed r/min |
Power W |
Voltage V |
Current Not greater than A |
CW/CWW Speed Difference r/min |
||
| Armature | Excitation | Armature | Excitation | |||||
| GS70SZ01 | 127 | 3000 | 40.0 | 24 | 24 | 3.00 | 0.500 | 200 |
| GS70SZ02 | 127 | 3000 | 40.0 | 27 | 27 | 2.60 | 0.440 | 200 |
| GS70SZ03 | 127 | 3000 | 40.0 | 48 | 48 | 1.60 | 0.250 | 200 |
| GS70SZ04 | 127 | 3000 | 40.0 | 110 | 110 | 0.60 | 0.110 | 200 |
| GS70SZ05 | 108 | 6000 | 68.0 | 24 | 24 | 4.80 | 0.500 | 300 |
| GS70SZ06 | 108 | 6000 | 68.0 | 27 | 27 | 4.40 | 0.440 | 300 |
| GS70SZ06/H1 | 108 | 6000 | 68.0 | 27 | 27 | 4.40 | 0.440 | 300 |
| GS70SZ07 | 108 | 6000 | 68.0 | 48 | 48 | 2.40 | 0.250 | 300 |
| GS70SZ08 | 108 | 6000 | 68.0 | 110 | 110 | 1.00 | 0.110 | 300 |
| GS70SZ09F | 108 | 1800 | 20.0 | 220 | 220 | 0.23 | 0.030 | |
| GS70SZ51 | 176 | 3000 | 55.0 | 24 | 24 | 4.00 | 0.570 | 200 |
| GS70SZ52 | 176 | 3000 | 55.0 | 27 | 27 | 3.50 | 0.500 | 200 |
| GS70SZ53 | 176 | 3000 | 55.0 | 48 | 48 | 1.90 | 0.310 | 200 |
| GS70SZ54 | 176 | 3000 | 55.0 | 110 | 110 | 0.80 | 0.130 | 200 |
| GS70SZ55 | 147 | 6000 | 92.0 | 24 | 24 | 6.00 | 0.570 | 300 |
| GS70SZ56 | 147 | 6000 | 92.0 | 27 | 27 | 5.40 | 0.500 | 300 |
| GS70SZ57 | 147 | 6000 | 92.0 | 48 | 48 | 3.00 | 0.310 | 300 |
| GS70SZ58 | 147 | 6000 | 92.0 | 110 | 110 | 1.20 | 0.130 | 300 |
| GS70SZ59 | 93 | 8000-10000 | 88.0 | 110 | 110 | 1.32 | 0.130 | 400 |
| GS70SZ61/H3 | 176 | 3000 | 55.0 | 27 | 27 | 3.50 | 0.490 | 200 |
| GS70SZ62/H2 | 398 | 6000 | 250.0 | 28 | 28 | 18.00 | 0.500 | |
| GS70SZ63/H3 | 147 | 6000 | 92.0 | 24 | 24 | 6.00 | 0.600 | 300 |
| GS70SZ64 | 127 | 3000 | 40.0 | 160 | 175 | 0.46 | 0.900 | 200 |
| GS70SZ65/H5 | 176 | 4500 | 83.0 | 36 | 36 | 3.50 | 0.320 | 250 |
| GS70SZ101 | 167 | 7500-9500 | 148.0 | 110 | 110 | 1.95 | 0.120 | 400 |
| GS70SZ101/H4 | 167 | 7500-9500 | 148.0 | 110 | 110 | 1.95 | 0.120 | 400 |
| GS70SZ103 | 294 | 2750 | 85.0 | 48 | 24 | 3.00 | 0.720 | 180 |
| GS70SZ104/H1 | 392 | 10000 | 410.0 | 27 | 27 | 30.00 | 0.600 | 500 |
| GS70SZ105/H2 | 539 | 6000 | 338.0 | 28 | 28 | 22.00 | 0.420 | |
| GS70SZ106 | 150 | 7000 | 110.0 | 200 | 200 | 0.75 | 0.083 | 350 |
Dimensional drawing
| Model | H | h | h1 | A | b | C | B | I | L | D | E | L4 | F | G | d | D2 | E2 | I12 | F1 | G2 | d2 | kg |
| – | – | – | (±0.25) | – | – | (±0.25) | – | – | h6 | – | – | +0.005 -0.015 |
h11 | H11 | h6 | – | – | +0.005 -0.015 |
h11 | H11 | ||
| GS70SZ01-49 | 42.5 | 79.5 | 5 | 74 | 90 | 22 | 39 | 55 | 114 | 6 | 12 | 16 | 2 | 4.3 | 7 | 5 | 12 | 13.5 | 2 | 3.3 | 7 | 1.5 |
| GS70SZ51-99 | 124 | 1.7 | ||||||||||||||||||||
| GS70SZ101-199 | 136 | 2 | ||||||||||||||||||||
| GS90SZ01-49 | 50 | 97.5 | 3 | 100 | 116 | 26.5 | 44 | 64 | 127 | 8 | 16 | 18 | 2 | 5.2 | 10 | 6 | 14 | 16 | 2 | 4.3 | 7 | 3 |
| GS90SZ51-99 | 40.5 | 147 | 3.8 | |||||||||||||||||||
| GS110SZ01-49 | 63 | 120.5 | 4 | 115 | 130 | 32 | 70 | 85 | 164 | 10 | 20 | 22 | 3 | 7.3 | 10 | 8 | 16 | 18 | 2 | 5.2 | 10 | 6.1 |
| GS110SZ51-99 | 47 | 194 | 7.9 |
Note:
If these models are not what you want, please freely tell us about your requirement. We will provide you with a suitable motor solution and price soon.
FAQ
1 Q: What’s your MOQ for gear motor and gearbox?
A: 1 unit is OK for different types.
2 Q: What about your warranty for your gear motor and gearbox?
A: One year.
3 Q: Do you provide OEM service with customer-logo?
A: Yes, we could do OEM orders.
4 Q: How about your payment terms ?
A: T/T, western union and paypal. 100% payment in advanced for orders less $10,000. 50% deposit and balance before delivery for orders over $10,000.
5 Q: How about your packing ?
A: Carton, plywood case and pallet
6 Q: What information should be given, if I buy gear motor and gearbox from you ?
A: Rated power, gearbox ratio, input speed, mounting position. More details, better!
7 Q: How do you deliver the gear motor and gearbox?
A: We will compare and choose the most suitable ways of delivery by sea, air or express courier after customer’s confirmation.
Warmly welcome your inquiry!
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Universal, Household Appliances, Swimming Pool Cleaner |
|---|---|
| Operating Speed: | Adjust Speed |
| Function: | Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Structure and Working Principle: | Brush |
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Are there common issues or challenges associated with servo motor systems, and how can they be addressed?
Servo motor systems are widely used in various applications, but they can encounter common issues or challenges that affect their performance and reliability. Let’s explore some of these issues and discuss potential solutions:
1. Positioning and Tracking Errors:
One common challenge in servo motor systems is positioning and tracking errors. These errors can occur due to factors such as mechanical backlash, encoder resolution limitations, or disturbances in the system. To address this issue, careful calibration and tuning of the servo control system are necessary. This includes adjusting feedback gains, implementing feedback filtering techniques, and utilizing advanced control algorithms to improve the system’s accuracy and minimize errors. Additionally, employing high-resolution encoders and backlash compensation mechanisms can help enhance the positioning and tracking performance.
2. Vibration and Resonance:
Vibration and resonance can impact the performance of servo motor systems, leading to reduced accuracy and stability. These issues can arise from mechanical resonances within the system or external disturbances. To mitigate vibration and resonance problems, it is crucial to analyze the system’s dynamics and identify critical resonant frequencies. Implementing vibration dampening techniques such as mechanical isolation, using vibration-absorbing materials, or employing active vibration control methods can help minimize the effect of vibrations and improve the system’s performance.
3. Overheating and Thermal Management:
Servo motors can generate heat during operation, and inadequate thermal management can lead to overheating and potential performance degradation. To address this issue, proper cooling and thermal management techniques should be employed. This may involve using heat sinks, fans, or liquid cooling systems to dissipate heat efficiently. Ensuring adequate ventilation and airflow around the motor and avoiding excessive current or overloading can also help prevent overheating. Monitoring the motor’s temperature and implementing temperature protection mechanisms can further safeguard the motor from thermal damage.
4. Electrical Noise and Interference:
Electrical noise and interference can affect the performance and reliability of servo motor systems. These issues can arise from electromagnetic interference (EMI) or radio frequency interference (RFI) from nearby equipment or electrical sources. To mitigate electrical noise, proper shielding and grounding techniques should be employed. Using shielded cables, ferrite cores, and grounding the motor and control system can help minimize the impact of noise and interference. Additionally, employing filtering techniques and surge protection devices can further improve system robustness against electrical disturbances.
5. System Integration and Compatibility:
Integrating a servo motor system into a larger control system or automation setup can present challenges in terms of compatibility and communication. Ensuring proper compatibility between the servo motor and the control system is crucial. This involves selecting appropriate communication protocols, such as EtherCAT or Modbus, and ensuring compatibility with the control signals and interfaces. Employing standardized communication interfaces and protocols can facilitate seamless integration and interoperability. Additionally, thorough testing and verification of the system’s compatibility before deployment can help identify and address any integration issues.
6. Maintenance and Service:
Maintenance and service requirements are important considerations for servo motor systems. Regular maintenance, including lubrication, inspection, and cleaning, can help prevent issues related to wear and tear. Following manufacturer-recommended maintenance schedules and procedures is essential to ensure the longevity and optimal performance of the motor. In case of any malfunctions or failures, having access to technical support from the manufacturer or trained service personnel can help diagnose and address problems effectively.
By being aware of these common issues and challenges associated with servo motor systems and implementing appropriate solutions, it is possible to enhance the performance, reliability, and lifespan of the servo motor system. Regular monitoring, proactive maintenance, and continuous improvement can contribute to optimizing the overall operation and efficiency of the system.
How does the accuracy of a servo motor impact the precision of a system it operates in?
The accuracy of a servo motor has a significant impact on the precision of the system in which it operates. Here’s how the accuracy of a servo motor influences the precision of the system:
1. Positioning Control:
The accuracy of a servo motor directly affects the precision of positioning control in a system. A servo motor with high accuracy can accurately and consistently reach and maintain the desired position. This precision in positioning control is crucial in applications where precise movements, such as in robotics or manufacturing processes, are required. If the servo motor lacks accuracy, it may introduce position errors, leading to reduced precision in the system’s overall operation.
2. Repeatability:
Repeatability refers to the ability of a system to consistently achieve the same position or motion repeatedly. The accuracy of a servo motor plays a vital role in achieving high repeatability. A servo motor with high accuracy will consistently return to the same position when commanded to do so. This level of repeatability is essential in applications where consistent and precise movements are necessary, such as in assembly lines or pick-and-place operations. A lack of accuracy in the servo motor can result in variations in position from one cycle to another, reducing the overall precision of the system.
3. Error Compensation:
The accuracy of a servo motor is crucial for error compensation in a system. In many applications, external factors, such as variations in load or environmental conditions, can introduce errors in the system’s operation. An accurate servo motor can help compensate for these errors by precisely adjusting its position or motion based on feedback from sensors. This error compensation capability contributes to maintaining the precision of the system, as the servo motor can continuously adjust to minimize any deviations from the desired position or trajectory.
4. System Stability:
The accuracy of the servo motor also impacts the stability of the system. A servo motor with high accuracy can achieve stable movements and maintain control over the system’s dynamics. It can respond accurately to control signals, preventing overshoot, oscillations, or erratic behaviors that can degrade system precision. On the other hand, a servo motor with lower accuracy may introduce instability or erratic movements, compromising the overall precision of the system.
5. System Calibration and Calibration:
An accurate servo motor simplifies the calibration and fine-tuning process of a system. When a system requires calibration, an accurate servo motor provides a reliable reference point for adjustments. The precise and consistent movements of the servo motor make it easier to calibrate other components or subsystems in the system, ensuring that the entire system operates with the desired precision. If the servo motor lacks accuracy, it can be challenging to calibrate the system effectively, resulting in reduced precision in the system’s operation.
In summary, the accuracy of a servo motor has a direct impact on the precision of the system it operates in. An accurate servo motor enables precise positioning control, high repeatability, effective error compensation, system stability, and simplified calibration processes. These factors collectively contribute to achieving the desired precision in the system’s operation. Therefore, selecting a servo motor with the appropriate level of accuracy is crucial for ensuring the overall precision and performance of the system.
Can you explain the difference between a servo motor and a regular electric motor?
A servo motor and a regular electric motor are both types of electric motors, but they have distinct differences in terms of design, control, and functionality.
A regular electric motor, also known as an induction motor or a DC motor, is designed to convert electrical energy into mechanical energy. It consists of a rotor, which rotates, and a stator, which surrounds the rotor and generates a rotating magnetic field. The rotor is connected to an output shaft, and when current flows through the motor’s windings, it creates a magnetic field that interacts with the stator’s magnetic field, resulting in rotational motion.
On the other hand, a servo motor is a more specialized type of electric motor that incorporates additional components for precise control of position, speed, and acceleration. It consists of a regular electric motor, a sensor or encoder, and a feedback control system. The sensor or encoder provides feedback on the motor’s current position, and this information is used by the control system to adjust the motor’s behavior.
The key difference between a servo motor and a regular electric motor lies in their control mechanisms. A regular electric motor typically operates at a fixed speed based on the voltage and frequency of the power supply. In contrast, a servo motor can be controlled to rotate to a specific angle or position and maintain that position accurately. The control system continuously monitors the motor’s actual position through the feedback sensor and adjusts the motor’s operation to achieve the desired position or follow a specific trajectory.
Another distinction is the torque output of the motors. Regular electric motors generally provide high torque at low speeds and lower torque at higher speeds. In contrast, servo motors are designed to deliver high torque at both low and high speeds, which makes them suitable for applications that require precise and dynamic motion control.
Furthermore, servo motors often have a more compact and lightweight design compared to regular electric motors. They are commonly used in applications where precise positioning, speed control, and responsiveness are critical, such as robotics, CNC machines, automation systems, and remote-controlled vehicles.
In summary, while both servo motors and regular electric motors are used to convert electrical energy into mechanical energy, servo motors offer enhanced control capabilities, precise positioning, and high torque at various speeds, making them well-suited for applications that require accurate and dynamic motion control.
editor by CX 2024-02-25
China best 100kVA AC Automatic Voltage Stabilizer Three Phase Servo Motor Control vacuum pump diy
Product Description
Advantages:
1.AC Automatic Voltage Stabilizer
2.LED Display:Display various protection data
3.Protection Function:Over Voltage Protect;Low Voltage Protect;Delay time;Circuit Breaker
4.Wide input voltage range
5.Efficiency more than 95%
6.No additional waveform distortion
7.CE,ISO certificates
Specifications:
1.Model:SBW-F-100KVA
2.Input Voltage:Single phase:175-265V
Three phase four-line:175V-265V(phase voltage) 300-465V(line voltage)
154V-286v(phase voltage) 270-490v(line voltage)
3.Output Voltage:Single phase 220V(adjustable)
3 phase 380V(adjustable)
4.Frequency:50HZ/60HZ
5.Phase: Three Phase
6.Packing Size:110*85*137cm
Application:
1.Computer
2.Test equipment
3.Lighting equipment
4.Alarm and security system
5.X-ray equipment
6.Medical equipment
7.Duplicator
8.Boadcasting equipment
9.Numeric control machine tool
10.Industrial robot
11.Hi-Fi equipment
| MODEL | SBW-F-50KVA | SBW-F-60KVA | SBW-F-100KVA | SBW-F-150KVA | SBW-F-200KVA | SBW-F-250KVA |
| SBW-F-320KVA | SBW-F-400KVA | SBW-F-500KVA | SBW-F-600KVA | SBW-F-800KVA | SBW-F-1000KVA | |
| TECHNOLOGY | Servo Motor control | |||||
|
DISPLAY
|
Meter | A/B/C phase input voltage | Light | A phase working indicator | ||
| A/B/C phase output voltage | B phase working indicator | |||||
| A phase output voltage | B phase working indicator | |||||
| B phase output voltage | input working indicator | |||||
| C phase output voltage | output working indicator | |||||
|
PROTECTION
|
Over voltage | Output voltage ≥248V±4v | ||||
| Low voltage | Output voltage ≤170v±4v | |||||
| Delay time | Long time(3-8M)/Short time(5 second) | |||||
| Circuit Breaker | Regulator/By-pass | |||||
| Feed phase | ||||||
|
INPUT VOLTAGE
|
Single phase:175v-265v Three phase four-line: 175v-265v(phase voltage) 300v-465v(line voltage) 154v-286v(phase voltage) 270v-490v(line voltage) |
|||||
| OUTPUT VOLTAGE | Single phaese 220v(adjustable) three phase 380v(adjustable) |
|||||
| FREQUENCY | 50Hz/60Hz | |||||
| PHASE | Three phase | |||||
| RESPONSE TIME | ≤1.5S | |||||
| EFFICIENCY | ≥95% | |||||
| AMBIENT TEMPERATURE | -10ºC-40ºC | |||||
| OVERLOAD | Double related current,one min | |||||
| WAVEFORM DISTORTION | no additional wave form distortion | |||||
| INSULATION RESISTANCE | Normally more than 2MΩ | |||||
| SPECIFICATIONS | ||||||
| POWER | 50KVA | 80KVA | 100KVA | 150KVA | 200KVA | 250KVA |
| PACKING SIZE(CM) | 110*85*137 | 110*85*137 | 110*85*137 | 125*100*196 | 125*100*196 | 135*100*196 |
| PACKING(pcs) | 1 | 1 | 1 | 1 | 1 | 1 |
| POWER | 320KVA | 400KVA | 500KVA | 600KVA | 800KVA | 1000KVA |
| PACKING SIZE(CM) | 135*100*196 | 135*100*196 | 135*100*196 | 135*100*196 | 135*100*196 | 203*106*230 |
| PACKING(pcs) | 1 | 1 | 1 | 1 | 1 | 1 |
Company Profile
The ZHangZhoug TTN Electric Co.,LTD. The ZHangZhoug Tinglang Electrical Appliance Co., Ltd. is a member unit of the China powersource academic society association and it is also a member unit of the China electrical equipment industry association.It is a high new science and technology enterprise. The company grasps “humanist” as the management philosophy and the management concept. The company positively introduces and nimbly utilizes the domestic as well as foreign advanced managerial experience and the specialized technology. The company contributes to the technical R&D department which has become mature and perfect day by day. The company has fully developed an integritied scientific management mechanism,including the design, the manufacture, the examination, the measurement, etc. The company has got ISO9001: 2000 international quality systems authentication. The company in line with the objective of ” The quality sets up the market, the prestige strives for the development” and in line with the quality policy of ” checks each step, each article goes through a strategic pass, lets the users be satisfied”. The company insists on the comprehensive implementation of “to makes the brand by the science and technology ” and persists in the development path of science and technology,the scale, multiplex, and the internationalization . The company mainly produces the manostat, the electronicten thousand-years calendar, UPS, the bath tyrant, the ventilating fan, the electric fan, the heater, the massager, the anoin generator,the mosquito drive aways,the induced door-bell and the juice-making machines and so on. All together there are more than 30 “Tinglang” and “Kebei” series and there are more than 200 kinds of specifications products. “By my sincerity, will receive in exchange for your heart” is the promise to the users from all staff of the company. The company is continuously devoting to improve the customers living quality and is unceasingly to display the unique pecialized technical superiority. The company is also devote to make the more valuable high tech products which will truly provide the customers with the perfect brand space
FAQ
1. who are we?
We are based in ZHangZhoug, China, start from 2005,sell to Mid East(45.00%),Eastern Europe(30.00%),Southeast Asia(10.00%),Africa(10.00%),South America(5.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Voltage Stabilizer,Power Inverter,Solar Charge Controller,Solar Panel
4. why should you buy from us not from other suppliers?
PC(programed control computerized) series AC automatic voltage stabilizer , which is the leading select of the American chip by our company, uses the computer digitization procedure to Control the functional movement of the entire machine.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,Western Union,Escrow;
Language Spoken:English,Chinese
| Current Type: | AC |
|---|---|
| Phase: | Three Phase |
| Frequency Characteristics: | High Frequency |
| Usage: | Servo Motor |
| Frequency: | High Frequency |
| Size: | Large |
| Customization: |
Available
|
|
|---|
Are there advancements or trends in servo motor technology that users should be aware of?
Yes, there have been significant advancements and emerging trends in servo motor technology that users should be aware of. These developments aim to enhance performance, improve efficiency, and provide new capabilities. Here are some noteworthy advancements and trends in servo motor technology:
1. Higher Power Density:
Advancements in servo motor design and manufacturing techniques have led to higher power densities. This means that modern servo motors can deliver more power in a smaller and lighter package. Higher power density allows for more compact and efficient machine designs, particularly in applications with limited space or weight restrictions.
2. Improved Efficiency:
Efficiency is a crucial aspect of servo motor technology. Manufacturers are continuously striving to improve motor efficiency to minimize energy consumption and reduce operating costs. Advanced motor designs, optimized winding configurations, and the use of high-quality materials contribute to higher efficiency levels, resulting in energy savings and lower heat generation.
3. Integration of Electronics and Control:
Integration of electronics and control functions directly into servo motors is becoming increasingly common. This trend eliminates the need for external motor controllers or drives, simplifies wiring and installation, and reduces overall system complexity. Integrated servo motors often include features such as on-board motion control, communication interfaces, and safety features.
4. Digitalization and Connectivity:
Servo motor technology is embracing digitalization and connectivity trends. Many modern servo motors come equipped with digital interfaces, such as Ethernet or fieldbus protocols, enabling seamless integration with industrial communication networks. This connectivity allows for real-time monitoring, diagnostics, and remote control of servo motors, facilitating condition monitoring, predictive maintenance, and system optimization.
5. Advanced Feedback Systems:
Feedback systems play a critical role in servo motor performance. Recent advancements in feedback technology have resulted in more accurate and higher-resolution encoders, resolvers, and sensors. These advanced feedback systems provide precise position and velocity information, enabling improved motion control, better accuracy, and enhanced dynamic response in servo motor applications.
6. Smart and Adaptive Control Algorithms:
Servo motor control algorithms have evolved to include smart and adaptive features. These algorithms can adapt to changing load conditions, compensate for disturbances, and optimize motor performance based on real-time feedback. Smart control algorithms contribute to smoother operation, increased stability, and improved tracking accuracy in various applications.
7. Safety and Functional Safety:
Safety is a paramount concern in industrial automation. Servo motor technology has incorporated safety features and functional safety standards to ensure the protection of personnel and equipment. Safety-rated servo motors often include features such as safe torque off (STO) functionality, safe motion control, and compliance with safety standards like ISO 13849 and IEC 61508.
It’s important for users to stay informed about these advancements and trends in servo motor technology. By understanding the latest developments, users can make informed decisions when selecting and implementing servo motors, leading to improved performance, efficiency, and reliability in their applications.
Can you explain the concept of torque and speed in relation to servo motors?
Torque and speed are two essential parameters in understanding the performance characteristics of servo motors. Let’s explore these concepts in relation to servo motors:
Torque:
Torque refers to the rotational force produced by a servo motor. It determines the motor’s ability to generate rotational motion and overcome resistance or load. Torque is typically measured in units of force multiplied by distance, such as Nm (Newton-meter) or oz-in (ounce-inch).
The torque output of a servo motor is crucial in applications where the motor needs to move or control a load. The motor must provide enough torque to overcome the resistance or friction in the system and maintain the desired position or motion. Higher torque allows the motor to handle heavier loads or more challenging operating conditions.
It is important to note that the torque characteristics of a servo motor may vary depending on the speed or position of the motor. Manufacturers often provide torque-speed curves or torque-position curves, which illustrate the motor’s torque capabilities at different operating points. Understanding these curves helps in selecting a servo motor that can deliver the required torque for a specific application.
Speed:
Speed refers to the rotational velocity at which a servo motor operates. It indicates how fast the motor can rotate and how quickly it can achieve the desired position or motion. Speed is typically measured in units of revolutions per minute (RPM) or radians per second (rad/s).
The speed of a servo motor is crucial in applications that require rapid movements or high-speed operations. It determines the motor’s responsiveness and the system’s overall performance. Different servo motors have different speed capabilities, and the maximum achievable speed is often specified by the manufacturer.
It is worth noting that the speed of a servo motor may also affect its torque output. Some servo motors exhibit a phenomenon known as “speed-torque curve,” where the motor’s torque decreases as the speed increases. This behavior is influenced by factors such as motor design, winding resistance, and control algorithms. Understanding the speed-torque characteristics of a servo motor is important for selecting a motor that can meet the speed requirements of the application while maintaining sufficient torque.
Overall, torque and speed are interrelated parameters that determine the performance capabilities of a servo motor. The torque capability determines the motor’s ability to handle loads, while the speed capability determines how quickly the motor can achieve the desired motion. When selecting a servo motor, it is essential to consider both the torque and speed requirements of the application to ensure that the motor can deliver the desired performance.
In which industries are servo motors commonly used, and what applications do they serve?
Servo motors are widely used across various industries due to their precise control capabilities and ability to deliver high torque at different speeds. Here are some industries where servo motors are commonly employed, along with their applications:
1. Robotics:
Servo motors are extensively used in robotics to control the movement of robotic limbs and joints. They enable precise positioning and accurate control, allowing robots to perform tasks with high accuracy and repeatability. Servo motors are also employed in humanoid robots, industrial manipulators, and collaborative robots (cobots).
2. Manufacturing and Automation:
In manufacturing and automation industries, servo motors are used in various applications such as conveyor systems, pick-and-place machines, packaging equipment, and assembly lines. Servo motors provide precise control over the movement of components, ensuring accurate positioning, fast response times, and high throughput.
3. CNC Machining:
Servo motors play a vital role in computer numerical control (CNC) machines, where they control the movement of axes (e.g., X, Y, and Z). These motors enable precise and smooth motion, allowing CNC machines to accurately shape and cut materials such as metal, wood, and plastics. Servo motors are also used in CNC routers, milling machines, lathes, and laser cutting equipment.
4. Aerospace and Aviation:
Servo motors find applications in the aerospace and aviation industries, particularly in flight control systems. They are used to control the movement of aircraft surfaces, such as ailerons, elevators, rudders, and flaps. Servo motors ensure precise and responsive control, contributing to the stability and maneuverability of aircraft.
5. Medical Devices:
In the medical field, servo motors are used in various devices and equipment. They are employed in robotic surgery systems, prosthetics, exoskeletons, infusion pumps, diagnostic equipment, and laboratory automation. Servo motors enable precise and controlled movements required for surgical procedures, rehabilitation, and diagnostic tests.
6. Automotive:
Servo motors have several applications in the automotive industry. They are used in electric power steering systems, throttle control, braking systems, and active suspension systems. Servo motors provide accurate control over steering, acceleration, and braking, enhancing vehicle safety and performance.
7. Entertainment and Motion Control:
Servo motors are widely used in the entertainment industry for animatronics, special effects, and motion control systems. They enable realistic movements of animatronic characters, robotic props, and camera rigs in film, television, and theme park attractions. Servo motors also find applications in motion simulators, gaming peripherals, and virtual reality systems.
In addition to these industries, servo motors are utilized in various other fields, including industrial automation, renewable energy systems, textile machinery, printing and packaging, and scientific research.
Overall, servo motors are versatile components that find widespread use in industries requiring precise motion control, accurate positioning, and high torque output. Their applications span across robotics, manufacturing, CNC machining, aerospace, medical devices, automotive, entertainment, and numerous other sectors.
editor by CX 2023-12-01